Solving the “LG TV Fails to Turn On with TCM Connected” Problem
(You should disconnect the RJ11 Data Cable from the TCM before performing this procedure. Remember to reconnect it when you are finished).
1. You access the Installer Setup Menu by using an LG Master Remote
2. Press the Menu button 5-6 times until the menu screen no longer appears on the TV
3. Enter the Installer access code 9-8-7-6 then press “enter” (“enter” is the button at the center of the four arrow keys unless the remote has a specific button labeled “enter). If the code is incorrect you will be offered a chance to retry. If need be – repeat step 2.
4. Scroll to find the setting for option #118-Power Options and change it to 001. After setting this option move off of 118 and then return to verify that the change was accepted.
5. Power off the TV to escape the Menu.
6. Reconnect the RJ-11 data cable.
The TV should now power on and off from the pillow speaker.